Alirac ECL-160 Manuel d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Alirac ECL-160. Alirac ECL-160 16 pages.

Connect the quick plug with electrode holder to the positive terminal and then

tightened them up clockwise.

4.4 Workpiece Connection

Connect the quick plug with earth clamp to the negative terminal on the front panel

below. And then tighten them up. Access the earth clamp to the workpiece.

Warning!

It is forbidden to connect the workpiece to the welder with iron or other poor

conductors.

NOTES: The case protection class is IP21S. Finger or round bars especially

metal rod must be less than 12.5mm and it can not be inserted into the welder.

Also you can not press it heavily.

1. Power Indicator

5. Negative Terminal

2. High Temperature

6. Power Source Cable

3. Knob

4. Positive Terminal

7. Power Switch

8. Fan