Garmin GTS 8000 Manuel du pilote - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel du pilote pour {nom_de_la_catégorie} Garmin GTS 8000. Garmin GTS 8000 26 pages. For citation m2, garmin g3000 software version 10
Également pour Garmin GTS 8000 : Remplacement (16 pages)
Imprimer la page
Power-Up
NOTE: The GTS 8XX Series automatically transitions from STANDBY to
OPERATE mode eight seconds after takeoff. The unit also automatically
transitions from OPERATE to STANDBY mode 24 seconds after landing.
After power-up, the GTS 8XX Series is in Standby Mode. The GTS 8XX Series
must be in Operating Mode for traffic to be displayed and for TAs to be issued.
System Status
The traffic mode is annunciated on the display product. The symbology
may vary by display product. See the particular pilot' s guide for specific details.
Mode
Self-test Initiated
Operating
Standby
Failed*
If the traffic unit fails, an annunciation as to the cause of the failure is shown
on the display product. During a failure condition, the Operating Mode cannot
be selected.
Traffic Map Page Annunciation
NO DATA
DATA FAILED
FAILED
190-00587-02 Rev. A
Traffic Mode Annunciation
(Traffic Page)
TEST
OPERATING
STANDBY
(also shown in white in center of page)
FAIL
Table 7 Example TAS/TCAS Modes
Table 8 TAS/TCAS Failure Annunciations
Garmin GTS 8XX Series Traffic Advisory System
Description
Data is not being received from the TAS/
TCAS I unit
Data is being received from the TAS/
TCAS I unit, but the unit is self-reporting
a failure
Incorrect data format received from the
TAS/TCAS I unit
Traffic Display
Enabled Icon
(Other Maps)
15