Garmin GTS 8000 파일럿 매뉴얼 - 페이지 19
{카테고리_이름} Garmin GTS 8000에 대한 파일럿 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GTS 8000 26 페이지. For citation m2, garmin g3000 software version 10
Garmin GTS 8000에 대해서도 마찬가지입니다: 교체 (16 페이지)
페이지 인쇄
Power-Up
NOTE: The GTS 8XX Series automatically transitions from STANDBY to
OPERATE mode eight seconds after takeoff. The unit also automatically
transitions from OPERATE to STANDBY mode 24 seconds after landing.
After power-up, the GTS 8XX Series is in Standby Mode. The GTS 8XX Series
must be in Operating Mode for traffic to be displayed and for TAs to be issued.
System Status
The traffic mode is annunciated on the display product. The symbology
may vary by display product. See the particular pilot' s guide for specific details.
Mode
Self-test Initiated
Operating
Standby
Failed*
If the traffic unit fails, an annunciation as to the cause of the failure is shown
on the display product. During a failure condition, the Operating Mode cannot
be selected.
Traffic Map Page Annunciation
NO DATA
DATA FAILED
FAILED
190-00587-02 Rev. A
Traffic Mode Annunciation
(Traffic Page)
TEST
OPERATING
STANDBY
(also shown in white in center of page)
FAIL
Table 7 Example TAS/TCAS Modes
Table 8 TAS/TCAS Failure Annunciations
Garmin GTS 8XX Series Traffic Advisory System
Description
Data is not being received from the TAS/
TCAS I unit
Data is being received from the TAS/
TCAS I unit, but the unit is self-reporting
a failure
Incorrect data format received from the
TAS/TCAS I unit
Traffic Display
Enabled Icon
(Other Maps)
15