Garmin GPS 17HVS - Receiver Module Manuel d'instructions d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Garmin GPS 17HVS - Receiver Module. Garmin GPS 17HVS - Receiver Module 12 pages. Declaration of conformity
Également pour Garmin GPS 17HVS - Receiver Module : Spécifications techniques (34 pages), Manuel d'installation (16 pages), Spécifications techniques (40 pages), Spécifications techniques (37 pages), Déclaration de conformité (2 pages)

NSTALLATION

NSTRUCTIONS

Tools

• Drill and Drill Bit

• Screwdriver

• Pencil

• Mounting Hardware (not included)

NOTE: Mounting hardware (fasteners) not included. Mounting holes are 5/16"

(7.9 mm) in diameter.

To install the Bail Mount and unit:

1. Using the bail mount as a template, mark the location of the four mounting holes.

Be sure to leave at least two inches of clearance behind the unit for the wiring.

2. Using an appropriate size drill bit, drill pilot holes for the fasteners.

3. Secure the bail mount to the surface with the fasteners.

4. Loosen the mounting knobs.

5. Slide the unit into the bail mount and tighten the mounting knobs.

Bail mount

NSTALLATION

NSTRUCTIONS

Mounting knobs

Bail Mount

GPSMAP 2006C/2010C & GPS 17