Garmin GPS 17HVS - Receiver Module Installation Instructions Manual - Page 4
Browse online or download pdf Installation Instructions Manual for Marine GPS System Garmin GPS 17HVS - Receiver Module. Garmin GPS 17HVS - Receiver Module 12 pages. Declaration of conformity
Also for Garmin GPS 17HVS - Receiver Module: Technical Specifications (34 pages), Installation Manual (16 pages), Technical Specifications (40 pages), Technical Specifications (37 pages), Declaration Of Conformity (2 pages)
Print Page
I
I
NSTALLATION
NSTRUCTIONS
Surface Mount
Tools
• Drill and Drill Bit
• Screwdriver
• Pencil
• Mounting Hardware (not included)
NOTE: Mounting hardware (fasteners) not included. Mounting holes are 5/16"
(7.9 mm) in diameter.
To install the Bail Mount and unit:
1. Using the bail mount as a template, mark the location of the four mounting holes.
Be sure to leave at least two inches of clearance behind the unit for the wiring.
2. Using an appropriate size drill bit, drill pilot holes for the fasteners.
3. Secure the bail mount to the surface with the fasteners.
4. Loosen the mounting knobs.
5. Slide the unit into the bail mount and tighten the mounting knobs.
Bail mount
4
I
I
NSTALLATION
NSTRUCTIONS
Mounting knobs
Bail Mount
GPSMAP 2006C/2010C & GPS 17