Calibration
You can calibrate the altimeter and compass from the
Calibration page.
Calibrate the altimeter by entering information or
letting the Colorado determine the elevation and
pressure. The Colorado relies on barometric pressure
to determine elevation, and the pressure at any given
elevation can fluctuate. You must know the elevation
(from a map point or other reliable data) or the pressure
(calibrated to sea level) for your current location.
Calibrate the compass by following the on-screen
directions.
To calibrate the altimeter select Shortcuts >
Setup > Calibration > Altimeter.
1. If you know the elevation, select Yes and enter
the information. Select No if you do not know the
elevation.
2. If you know the pressure select Yes. Select No if
you do not know the pressure.
3. A "Calibration Completed" or "Calibration
Failed" message appears after calibration is
completed.
Colorado
Series Owner's Manual
™
Fitness Setup
To connect an optional Garmin Heart Rate Monitor or
Garmin Bike Cadence Sensor to your Colorado, select
Shortcuts > Setup > Fitness.
Heart Rate Monitor—to use the Colorado with a heart
rate monitor, select On. Select Off when not in use.
Search for a Heart Rate Monitor—selecting this
automatically begins a search for a Garmin Heart
Rate Monitor and the message "Searching" appears.
A "Connected" message appears when the Colorado
connects to a Garmin Heart Rate Monitor.
Bike Cadence Sensor—to use the Colorado with a bike
cadence sensor, select On. Select Off when not in use.
Search for a Bike Cadence Sensor—selecting this
automatically begins a search for a Garmin Bike
Cadence sensor and the message "Searching" appears.
A "Connected" message appears when the Colorado
connects to a Garmin Bike Cadence sensor.
NOTE: To determine if you are connected
to another Colorado, move away from other
Colorado units, sensors, or monitors.
c
c
uStomIzInG the
olorado
Imprimer la page