Garmin FUSION Apollo MS-WB670 Manuel du propriétaire - Page 30
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Garmin FUSION Apollo MS-WB670. Garmin FUSION Apollo MS-WB670 44 pages. Marine hideaway stereo
Également pour Garmin FUSION Apollo MS-WB670 : Manuel d'instructions d'installation (19 pages)
Imprimer la page
Speaker Zone Settings
Disabling the Internal Amplifier
If you do not connect speakers directly to zones 1 and 2, you can disable the internal amplifier to reduce power
consumption.
1 Select
> SETTINGS.
2 Select the name of the stereo.
3 Select ZONE.
4 Select INTERNAL AMP ON to clear the check box.
Setting the Home Zone
The home zone is the speaker zone that you adjust by default when you turn the dial on the remote control.
1 Select
> SETTINGS.
2 Select the name of the remote control you plan to use with this stereo.
3 Select ASSIGN HOME ZONE.
4 Select a zone.
Synchronizing the Source and Zone Volume Levels
You can synchronize the volume levels on one or all zones with some source devices, such as a Bluetooth,
AirPlay, or UPnP source.
1 Select
> SETTINGS.
2 Select the name of the stereo.
3 Select ZONE > PHONE VOLUME SYNC.
4 Select a zone or ALL.
When you adjust the volume on the connected source, the volume on the selected zone is also adjusted.
Adjusting the Power-On Volume Limit
By default, when you turn on the stereo, the system automatically reduces the volume to level 12 if it was
louder than that when you turned it off. You can adjust this limit if you want to retain a louder volume or limit to
a lower volume when you turn on the stereo.
NOTE: This setting affects all zones on the stereo.
1 Select
> SETTINGS.
2 Select the name of the stereo.
3 Select ZONE > POWER ON VOLUME LIMIT.
4 Adjust the volume limit.
24
General Settings