Garmin FUSION Apollo MS-WB670 소유자 매뉴얼 - 페이지 30

{카테고리_이름} Garmin FUSION Apollo MS-WB670에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin FUSION Apollo MS-WB670 44 페이지. Marine hideaway stereo
Garmin FUSION Apollo MS-WB670에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (19 페이지)

페이지 인쇄
Garmin FUSION Apollo MS-WB670 소유자 매뉴얼

Speaker Zone Settings

Disabling the Internal Amplifier

If you do not connect speakers directly to zones 1 and 2, you can disable the internal amplifier to reduce power
consumption.
1 Select
> SETTINGS.
2 Select the name of the stereo.
3 Select ZONE.
4 Select INTERNAL AMP ON to clear the check box.

Setting the Home Zone

The home zone is the speaker zone that you adjust by default when you turn the dial on the remote control.
1 Select
> SETTINGS.
2 Select the name of the remote control you plan to use with this stereo.
3 Select ASSIGN HOME ZONE.
4 Select a zone.

Synchronizing the Source and Zone Volume Levels

You can synchronize the volume levels on one or all zones with some source devices, such as a Bluetooth,
AirPlay, or UPnP source.
1 Select
> SETTINGS.
2 Select the name of the stereo.
3 Select ZONE > PHONE VOLUME SYNC.
4 Select a zone or ALL.
When you adjust the volume on the connected source, the volume on the selected zone is also adjusted.

Adjusting the Power-On Volume Limit

By default, when you turn on the stereo, the system automatically reduces the volume to level 12 if it was
louder than that when you turned it off. You can adjust this limit if you want to retain a louder volume or limit to
a lower volume when you turn on the stereo.
NOTE: This setting affects all zones on the stereo.
1 Select
> SETTINGS.
2 Select the name of the stereo.
3 Select ZONE > POWER ON VOLUME LIMIT.
4 Adjust the volume limit.
24
General Settings