AEG FAVORIT 34030 VI Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG FAVORIT 34030 VI. AEG FAVORIT 34030 VI 24 pages. Dishwasher
Également pour AEG FAVORIT 34030 VI : Manuel de l'utilisateur (20 pages), Manuel de l'utilisateur (20 pages), Manuel de l'utilisateur (20 pages)

AEG FAVORIT 34030 VI Manuel de l'utilisateur

Setting mode

The appliance must be in setting mode for these operations:
• To select and start a washing programme.
• To adjust electronically the level of the water softener.
• To deactivate/activate the audible signals.
Press the on/off button. The appliance is in setting mode when:
• All the programme lights are off and the end-of-programme indicator light flashes.
Press the on/off button. The appliance is not in setting mode when:
• Only one programme light comes on.
– It is necessary to cancel the programme to go back to the setting mode. Refer to 'Se-
lect and start a washing programme'.

Audible signals

You can hear the audible signals when:
• The washing programme ends.
• The appliance has a malfunction.
Do these steps to deactivate the audible signals:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold the programme button until the programme light A flashes and the pro-
gramme light B comes on.
4. When the programme light A flashes and the programme light B comes on, press im-
mediately the programme button again.
The programme light A comes on and the programme light B starts to flash.
After some seconds the programme light A goes off and the end-of-programme indica-
tor light comes on. (The programme light B continues to flash).
– The audible signals are active.
5. Press the programme button again. The end-of-programme indicator light goes off.
– The audible signals are deactivated.
6. Switch of the appliance to confirm the operation.
Do these steps to activate again the audible signals:
1. Follow the procedure how to deactivate the audible signals from point 1 to point 4.
2. The programme light A goes off. The end-of-programme indicator light is off. (The pro-
gramme light B continues to flash).
– The audible signals are deactivated.
3. Press the programme button again. The end-of-programme indicator light comes on.
– The audible signals are active.
4. Switch of the appliance to confirm the operation.
9
Control panel