AEG FAVORIT 34030 VI Kullanıcı Kılavuzu - Sayfa 9

Bulaşık Makinesi AEG FAVORIT 34030 VI için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG FAVORIT 34030 VI 24 sayfaları. Dishwasher
Ayrıca AEG FAVORIT 34030 VI için: Kullanıcı Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Setting mode

The appliance must be in setting mode for these operations:

• To select and start a washing programme.

• To adjust electronically the level of the water softener.

• To deactivate/activate the audible signals.

Press the on/off button. The appliance is in setting mode when:

• All the programme lights are off and the end-of-programme indicator light flashes.

Press the on/off button. The appliance is not in setting mode when:

• Only one programme light comes on.

– It is necessary to cancel the programme to go back to the setting mode. Refer to 'Se-

lect and start a washing programme'.

Audible signals

You can hear the audible signals when:

• The washing programme ends.

• The appliance has a malfunction.

Do these steps to deactivate the audible signals:

1. Switch on the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold the programme button until the programme light A flashes and the pro-

gramme light B comes on.

4. When the programme light A flashes and the programme light B comes on, press im-

mediately the programme button again.

The programme light A comes on and the programme light B starts to flash.

After some seconds the programme light A goes off and the end-of-programme indica-

tor light comes on. (The programme light B continues to flash).

– The audible signals are active.

5. Press the programme button again. The end-of-programme indicator light goes off.

– The audible signals are deactivated.

6. Switch of the appliance to confirm the operation.

Do these steps to activate again the audible signals:

1. Follow the procedure how to deactivate the audible signals from point 1 to point 4.

2. The programme light A goes off. The end-of-programme indicator light is off. (The pro-

gramme light B continues to flash).

– The audible signals are deactivated.

3. Press the programme button again. The end-of-programme indicator light comes on.

– The audible signals are active.

4. Switch of the appliance to confirm the operation.

Control panel