Fujitsu ABY24TL MA Manuel d'utilisation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Fujitsu ABY24TL MA. Fujitsu ABY24TL MA 27 pages.
Imprimer la page
6
Press the SET TIME button to set the day's first OFF
time.
The earliest OFF time you can set is 5 minutes after the ON time. The
latest OFF time is 23:55 on the subsequent day.
7
Press the SET button.
This registers the first OFF time for the day, completing the "WEEKLY 1"
settings for that day.
The display switches to "WEEKLY 2", and the day's second ON time be-
gins flashing.
8
Repeat the operations described in Steps 4 to 7 to set
the second ON and OFF times for the day (the "WEEKLY
2" times).
When you press the SET button after setting the "WEEKLY 2" OFF time,
the system registers the "WEEKLY 2" settings for the day and returns you
to the "WEEKLY 1" ON time setup process. (The first ON setting reap-
pears and begins flashing.)
You can review your settings by pressing the SET button. Each press
moves you to the next setting, as follows.
WEEKLY 1
ON
9
Press the SET TEMP./DAY button to select another day
for setup. The repeat steps 4 to 8 above to set the ON
and OFF times for that day.
10
When you have finished setting all of the times, hold
down the SET button for 3 seconds.
The WEEKLY display flashes for 3 seconds while the new WEEKLY TIMER
settings are registered, and then the clock display reappears.
NOTES:
(1) If no time values are flashing, the clock display will automatically reappear after 15 seconds if no buttons are pressed.
(2) A flashing time value indicates that the system is in time-setting mode. To return to the clock display you must hold
down the SET button for 3 seconds.
(3) You do not need to set values for both WEEKLY 1 and WEEKLY 2. If you wish, you can set values only for WEEKLY 1
or only for WEEKLY 2.
(4) The allowable range for the day's time settings is shown below.
Cannot set
ON
Previous day's WEEKLY
settings
(5) If you set the OFF time to occur on the day following the ON time, the NEXT DAY caption appears on the display.
AUTO
ON
TIMER
DAY
WEEKLY
OFF
1
2
NEXT DAY
WEEKLY 1
WEEKLY 2
OFF
ON
5 min.
Available range
OFF
0:00
AUTO
DEFROST TEST
WEEKLY
1
TIMER
MODE
CLOCK ADJUST
If the timer is not set, press the SET but-
ton with the time display blank "
and perform next operation.
WEEKLY 2
OFF
1
TIMER
5 min.
Cannot set
ON
Next day's WEEKLY
settings
0:00
AUTO
AUTO
ON
TIMER
DAY
OFF
2
DEFROST TEST
SET TIME
TEMP./DAY
FAN
CONTROL
MASTER
CONTROL
6
START/STOP
SET
DAY OFF
7
CLOCK
AUTO
AUTO
2
DEFROST TEST
SET TIME
TEMP./DAY
FAN
OFF
En-11
",