Fujitsu ABY24TL MA Manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Fujitsu ABY24TL MA. Fujitsu ABY24TL MA 27 pages.
Imprimer la page
TIMER OPERATION (OFF TIMER/ON TIMER)
Instructions relating to "the indoor unit's indicator lamp" (**) are applicable to "CEILING SUSPENSION TYPE" and "FLOOR
CONSOLE/UNDER CEILING DUAL TYPE".
Before using the timer function, be sure that the remote controller is set to the correct current time and Day.
Press the START/STOP button; after the unit starts operation perform the following procedure:
OFF Timer / ON Timer
1
Press the TIMER MODE button and display either OFF
Timer or ON Timer.
The timer will start operating. (If you set the ON timer, the air conditioner
will stop operating.)
Each time the button is pressed the timer function changes in the follow-
ing order:
NON STOP (RESET)
**The indoor unit's TIMER indicator lamp (green) will light up.
2
Press the SET TIME button and set the timer time.
▲ : Use to advance the time forward.
▼ : Use to turn the time back.
(Press once to move the time 1 minute; hold down and the time will move
10 minutes at a time.)
To Confirm or Change Settings
Before Starting Operation
● To confirm settings
Press the TIMER MODE button once.
(The timer setting information will be
displayed for 15 seconds after the
TIMER MODE button is pressed.)
● To change settings
Confirm the settings as noted above,
then press the SET TIME button and
TIMER MODE button as necessary to
change the desired timer setting.
(The timer settings will be displayed
for 15 seconds after the button is
pressed.)
● After confirming or changing the set-
tings, press the START/STOP button
to start operation.
OFF
ON
WEEKLY
To Change the Timer Setting
During Operation
Operate as noted in step 2.
To Change the Timer Mode
During Operation
Press the TIMER MODE button and set
the unit to the desired mode.
CLOCK
TEMP
AUTO
°C
OFF
HIGH
TIMER
TIMER
OFF
1
2
TIMER
SET TIME
TEMP./DAY
FAN
MODE
CONTROL
CLOCK ADJUST
1
2
SET
DAY OFF
CLOCK
TEMP
AUTO
°C
OFF
HIGH
TIMER
TIMER
OFF
1
2
TIMER
SET TIME
TEMP /DAY
FAN
Example: Setting the OFF TIMER to
23:35.
To Cancel the Timer Mode
During Timer Operation
Press the TIMER MODE button and set
the display to "NON STOP" (the unit will
switch to non-stop operation).
To Stop Operation During
Use of Timer Mode
Press the START/STOP button.
AUTO
COOL
DEFROST TEST
MASTER
CONTROL
START/STOP
AUTO
COOL
DEFROST TEST
En-9