AEG 3531 WK-m Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AEG 3531 WK-m. AEG 3531 WK-m 12 pages. Electrolux cooktop user manual
Également pour AEG 3531 WK-m : Manuel d'instruction (24 pages), Manuel d'instruction (10 pages)

Imprimer la page

Ignitions

1. Depress and turn the control knob

for the burner, the left to Max. flame

2. The ignition electrode will emit

sparks, and when the mixture of gas

and air is correct, the burner will be

ignited. Is not possible to connect

the unit to mains, a match may be

used to ignite the burner

3. After starting the burner, press the

control knob for approx. 10

seconds to activate the automatic

thermo couple.

4. Important Ignition position is at

Max flame

Fixing

* Prepare the cut out according to

the "cut out measurements".

Connect the brass extension Piece to

the bras elbow on the underside of hob.

* Screw the fixing brackets out to such

an extent that they can be turned in

under the table top.

Tighten the brackets on the to table

top with an ordinary screwdriver.

Gas installation

The appliance is factory set for

Natural Gas. Fit the gas regulator

supplied with the appliance to the gas

inlet. The location of the gas inlet is

approximately 240mm form the right

hand side of the appliance and

40mm from the back of the appliance.

The connection of the Gas Regulator

is ½" Gas female thread and the

pressure at the test point should be

adjusted to1.00kPa with the large and

simmer burners operating at

maximum.

For Universal LPG connection, the

appliance needs to be first converted

using the conversion kit and

instructions supplied with the

appliance.