AEG 88100K Manuel d'installation et d'utilisation - Page 33

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AEG 88100K. AEG 88100K 43 pages. Ceramic glass induction hob

Imprimer la page

1. Technical Data

... the indicator f is flashing

Check whether

– the pan is located on the correct cooking zone,

– the diameter of the pan base is too small for the cooking zone,

– the pan is suitable for induction.

... _ appears on the display

Check whether

– the cooking zone has overheated.

switch off the appropriate cooking zone and let it cool down. Try

switching on the cooking zone again using a suitable pan after a few

minutes.

– the automatic switch-down for the cooking zone has triggered.

You can reactivate the cooking zone by switching it off and on brief-

ly.

... the power function cannot be switched on?

– Switch off the cooking zone for approx. 10 minutes.

If this fault occurs repeatedly, check

– whether the requisite ventilation gap between the work surface and

the cabinet panel underneath it has been covered over.

– that a sufficiently large ventilation gap was maintained under the

work surface when the appliance was installed (5 mm).