AEG 88100K Руководство по установке и эксплуатации - Страница 33
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Варочная панель AEG 88100K. AEG 88100K 43 страницы. Ceramic glass induction hob
Печатать страницу... the indicator f is flashing
Check whether
– the pan is located on the correct cooking zone,
– the diameter of the pan base is too small for the cooking zone,
– the pan is suitable for induction.
... _ appears on the display
Check whether
– the cooking zone has overheated.
switch off the appropriate cooking zone and let it cool down. Try
switching on the cooking zone again using a suitable pan after a few
minutes.
– the automatic switch-down for the cooking zone has triggered.
You can reactivate the cooking zone by switching it off and on brief-
ly.
... the power function cannot be switched on?
– Switch off the cooking zone for approx. 10 minutes.
If this fault occurs repeatedly, check
– whether the requisite ventilation gap between the work surface and
the cabinet panel underneath it has been covered over.
– that a sufficiently large ventilation gap was maintained under the
work surface when the appliance was installed (5 mm).
33