Brother DCP-T820DW Manuel d'installation rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother DCP-T820DW. Brother DCP-T820DW 4 pages.
Également pour Brother DCP-T820DW : Manuel d'installation rapide (4 pages), Manuel d'installation rapide (4 pages), Manuel d'installation rapide (4 pages), Manuel d'installation rapide (4 pages), Manuel de l'utilisateur (23 pages), Manuel de sécurité des produits (18 pages)

Brother DCP-T820DW Manuel d'installation rapide
5

Set the date and time

1.
Press OK to set the date and time.
2.
Press a or b to select the number, and then press
OK to set the date and time.
7

Connect your computer or mobile device

Install Brother software to use your machine. Visit one of the following websites:
For Computers:
setup.brother.com
For Windows only, CD installation is also
available.
Manual wireless setup (if needed)
Find the SSID (Network Name) and Network Key
(Password) on your wireless access point/router.
SSID: XXXXXXX
Network Key: XXXX
If you cannot find this information, ask your
network administrator or wireless access point/
router manufacturer.
When finished, remove the bottle,
pointing the nozzle upward so the ink
does not spill.
6
When the machine has finished the initial cleaning process, follow the steps on the LCD to configure
the machine settings.
• Check the print quality
None
For Mobile Devices:
brother.com/apps
Install the Brother iPrint&Scan
application.
1.
Go to your machine and press WiFi.
2.
Press OK to select [Find
Network].
The [WLAN Enable?] message
appears on the LCD.
3.
Press a to select [On].
Setup Complete

Machine settings

A Few
About Half
Many
Connect your Brother machine and computer/mobile device to the
same network.
Follow the on-screen instructions.
For Wired Network Connection* and USB Connection:
Use the correct port (based on the cable you are using)
inside the machine, as shown.
*DCP-T820DW
Select the SSID (Network Name) for your access point/
router and enter the Network Key (Password).
To enter the Network Key, hold down or repeatedly press a
or b to select a character from the list below:
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQR
STUVWXYZ0123456789(space)!"#$%&'()*+,-./:;<=>?@
[\]^_`{|}~
When the wireless setup is successful, the LCD displays
[Connected].
Replace the ink tank cap. Repeat step
for the other ink tanks, and then
4
close the ink tank cover.
DCP-T820DW:
• Configure the paper tray settings
1