5
Set the date and time
1.
Press OK to set the date and time.
2.
Press a or b to select the number, and then press
OK to set the date and time.
7
Connect your computer or mobile device
Install Brother software to use your machine. Visit one of the following websites:
For Computers:
setup.brother.com
For Windows only, CD installation is also
available.
Manual wireless setup (if needed)
Find the SSID (Network Name) and Network Key
(Password) on your wireless access point/router.
SSID: XXXXXXX
Network Key: XXXX
If you cannot find this information, ask your
network administrator or wireless access point/
router manufacturer.
When finished, remove the bottle,
pointing the nozzle upward so the ink
does not spill.
6
When the machine has finished the initial cleaning process, follow the steps on the LCD to configure
the machine settings.
• Check the print quality
None
For Mobile Devices:
brother.com/apps
Install the Brother iPrint&Scan
application.
1.
Go to your machine and press WiFi.
2.
Press OK to select [Find
Network].
The [WLAN Enable?] message
appears on the LCD.
3.
Press a to select [On].
Setup Complete
Machine settings
A Few
About Half
Many
Connect your Brother machine and computer/mobile device to the
same network.
Follow the on-screen instructions.
For Wired Network Connection* and USB Connection:
Use the correct port (based on the cable you are using)
inside the machine, as shown.
*DCP-T820DW
Select the SSID (Network Name) for your access point/
router and enter the Network Key (Password).
To enter the Network Key, hold down or repeatedly press a
or b to select a character from the list below:
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQR
STUVWXYZ0123456789(space)!"#$%&'()*+,-./:;<=>?@
[\]^_`{|}~
When the wireless setup is successful, the LCD displays
[Connected].
Replace the ink tank cap. Repeat step
for the other ink tanks, and then
4
close the ink tank cover.
DCP-T820DW:
• Configure the paper tray settings
1
Stampa la pagina