Brother GT-3 Series Manuel d'entretien - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Brother GT-3 Series. Brother GT-3 Series 16 pages. Cookbook maintenance
Également pour Brother GT-3 Series : Manuel d'instruction (15 pages), Manuel d'instruction (12 pages), Manuel d'instruction (18 pages), Manuel de référence (8 pages), Manuel de référence (8 pages), Manuel (3 pages), Installer (4 pages), Manuel d'entretien (17 pages)

> CARRIAGE FELTS REPLACEMENT [now Roller Felts] :

SPARE PARTS NUMBER:

> WIPER CLEANER REPLACEMENT :

SPARE PARTS NUMBER:

> FAN FILTER REPLACEMENT :

AIR FLOW

COARSE

SPARE PARTS NUMBER:

The Carriage contains 2 brackets on the front edge that

hold 4 felt pads onto Velcro inserts.

The carriage assembly has 2 wheels that ride along the front

rail.

The pads keep the rail clean to help allow the carriage move

unrestricted and smooth.

Be carefull not to bend the 2 brackets, it may end up with errors

(i.e. 6107. 6108) and also, do NOT put oil on the felts !

SB 2652101

SB3101001

The fan filter collects the mist from the print head spray from

the exhaust provided by the fan.

> Remember to place the new filter with the "Coarse" side in-

serted into the bracket.

> The air flow should enter the rougher side.

FINE

SB3018001

The Wiper Cleaner needs to be replaced reg-

ularly according to MPE or visual inspection.

Clean the Print Head Caps and Wiper Blade

before replacing the Wiper Cleaner !