Brother GT-3 Series 유지 관리 매뉴얼 - 페이지 9
{카테고리_이름} Brother GT-3 Series에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother GT-3 Series 16 페이지. Cookbook maintenance
Brother GT-3 Series에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지), 사용 설명서 (12 페이지), 사용 설명서 (18 페이지), 참조 매뉴얼 (8 페이지), 참조 매뉴얼 (8 페이지), 매뉴얼 (3 페이지), 설치 (4 페이지), 유지 관리 매뉴얼 (17 페이지)
페이지 인쇄
> CARRIAGE FELTS REPLACEMENT [now Roller Felts] :
+
SPARE PARTS NUMBER:
> WIPER CLEANER REPLACEMENT :
+
SPARE PARTS NUMBER:
> FAN FILTER REPLACEMENT :
AIR FLOW
COARSE
+
SPARE PARTS NUMBER:
The Carriage contains 2 brackets on the front edge that
hold 4 felt pads onto Velcro inserts.
The carriage assembly has 2 wheels that ride along the front
rail.
The pads keep the rail clean to help allow the carriage move
unrestricted and smooth.
Be carefull not to bend the 2 brackets, it may end up with errors
(i.e. 6107. 6108) and also, do NOT put oil on the felts !
SB 2652101
SB3101001
The fan filter collects the mist from the print head spray from
the exhaust provided by the fan.
> Remember to place the new filter with the "Coarse" side in-
serted into the bracket.
> The air flow should enter the rougher side.
FINE
SB3018001
The Wiper Cleaner needs to be replaced reg-
ularly according to MPE or visual inspection.
Clean the Print Head Caps and Wiper Blade
before replacing the Wiper Cleaner !
8