Brother GTX600NB Manuel de configuration - Page 41

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Brother GTX600NB. Brother GTX600NB 45 pages. Garment pra inter
Également pour Brother GTX600NB : Manuel de sécurité (2 pages)

Imprimer la page

Adjustment

Checking the nozzle check pattern

1) Make sure that the platen height is set at the "A" position.

Use a platen sized 14 in. x 16 in. (356 mm x 406

mm), which is included at the time of your

TIPS

purchase.

2) Place a sheet of A4 or letter-size white paper as illustrated

below (Pretreated T-shirt is also acceptable).

If the paper tends to be floated, tape the corners.

3) Perform the following operation on the screen of the printer:

-> [Test Print] -> [Nozzle Check CMYK] ->

Press and hold the two print buttons at the same time.

4) When printing is finished, and the printer returns to Standby

mode, set a piece of black paper or transparent sheet (such

as OHP sheet) of A4 or letter size in the same manner as

step 2. (A pretreated black or dark color T-shirt is also

acceptable.)

-> [Test Print] -> [Nozzle Check White] ->

Press and hold the two print buttons at the same time.

6) Check the printed results for both nozzle check prints and

determine if there is a problem.

If missing nozzles are found as indicated by the arrows

below, there is a problem concerning the firing of the print

heads.

Even if the lines of the white-side printed result

are light, since white ink is fired from more than

one nozzle on the same place, the quality is not

affected.

The following items are printed at the bottom of

the nozzle check pattern:

X1032

Serial number, firmware version, print date

TIPS

(day/month/year), time, temperature, humidity,

and number of prints

The name of the corresponding head (Head A or

Head B) is printed next to each nozzle check

pattern.