Brother GTX600NB Kurulum Kılavuzu - Sayfa 41

Yazıcı Brother GTX600NB için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Brother GTX600NB 45 sayfaları. Garment pra inter
Ayrıca Brother GTX600NB için: Güvenlik Kılavuzu (2 sayfalar)

Adjustment

1
Checking the nozzle check pattern
1) Make sure that the platen height is set at the "A" position.
Use a platen sized 14 in. x 16 in. (356 mm x 406
mm), which is included at the time of your
TIPS
purchase.
2) Place a sheet of A4 or letter-size white paper as illustrated
below (Pretreated T-shirt is also acceptable).
If the paper tends to be floated, tape the corners.
3) Perform the following operation on the screen of the printer:
-> [Test Print] -> [Nozzle Check CMYK] ->
Press and hold the two print buttons at the same time.
4) When printing is finished, and the printer returns to Standby
mode, set a piece of black paper or transparent sheet (such
as OHP sheet) of A4 or letter size in the same manner as
step 2. (A pretreated black or dark color T-shirt is also
acceptable.)
5)
-> [Test Print] -> [Nozzle Check White] ->
Press and hold the two print buttons at the same time.
6) Check the printed results for both nozzle check prints and
determine if there is a problem.
If missing nozzles are found as indicated by the arrows
below, there is a problem concerning the firing of the print
heads.
Even if the lines of the white-side printed result
are light, since white ink is fired from more than
one nozzle on the same place, the quality is not
affected.
The following items are printed at the bottom of
the nozzle check pattern:
X1032
Serial number, firmware version, print date
TIPS
(day/month/year), time, temperature, humidity,
->
and number of prints
The name of the corresponding head (Head A or
Head B) is printed next to each nozzle check
pattern.
->
32