Fujitsu Primergy BX620 S3 Manuel de configuration du système et d'information sur les commandes - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de configuration du système et d'information sur les commandes pour {nom_de_la_catégorie} Fujitsu Primergy BX620 S3. Fujitsu Primergy BX620 S3 18 pages.
Imprimer la pagePRIMERGY BX620 S2 / BX620 S3
PRIMERGY BX620 S2
LAN Card/Internal backup device (PRIMERGY SX10)
Max: 1
Expansion Card
Slot Module
Connector
Expansion Card Slot Module
PG-CS102
Notes on applying Expansion Card Slot Module (PG-CS102)
In case that Expansion Card Slot Module (PG-CS102) is mounted on BX620 S2, and PCI card is monted on Expansion Card Slot Module,
the slot of mounted PCI card is at front side of BX600 S2 Blade Server System Unit (PGUR3SC1).
The cable connected to PCI card can be gone from front side to back side of BX600 S2 Blade Server System Unit (PGUR3SC1)
by using Front-Rear Cable-Thru kit (PG-R1CM1).
Front-Rear Cable-Thru kit (PG-R1CM1) is mounted just under BX620 S2 and occupies 1U.
Front-Rear Cable-Thru kit
PG-R1CM1
LAN/Fibre Channel Interface
On-board LAN
Interface
Max: 1
Expansion
Board Slot
Eth. Ctrl 2x 1000-BASE-T Cu
PG-1862
*Dual port
SCSI Ctrl U160
PG-128
1Gbit/s Ethernet I/O Module
PG-LND101
PGBLND101 (for CTO)
2Gbit/s FC I/O Module
PG-FCD102
PGBFCD102 (for CTO)
Twist Pair Cable (category 5e)
SCSI Cable HDCI 1.5m
PRIMERGY SX10
PG-CBLS001
PG-R1BC4
SCSI Cable HDCI 5m
PG-CBLS002
Switch Blade /
GbE Pass-Thru Blade
Switch Blade /
GbE Pass-Thru Blade
FC Switch Blade /
FC Pass-Thru Blade