Fujitsu PRIMERGY Econel 200 S2 Manuel de supplément de service - Page 26
Parcourez en ligne ou téléchargez le pdf Manuel de supplément de service pour {nom_de_la_catégorie} Fujitsu PRIMERGY Econel 200 S2. Fujitsu PRIMERGY Econel 200 S2 39 pages.
Imprimer la page
Replacing the power supply unit
4.5
Replacing the power supply unit
Ê Remove the side cover as described in section "Preparation" on page 17.
Ê Remove the processor fan 2 as described in section "Removing the
processor fan 2" on page 17.
Ê Remove the system fan as described in section "Removing the system fan"
on page 18.
Ê Remove the memory air duct as described in section "Removing the
memory air duct" on page 18.
Ê Disconnect all power supply cables from the system board and from the
drives (see cabling in the Options Guide) and release the cables from the
cable clamps.
Figure 9: Removing the screws
Ê Remove the four screws at the rear side of the server.
26
Service Supplement
Replacement routines
Econel 200 S2