Fujitsu PRIMERGY Econel 200 S2 Handleiding Service Supplement - Pagina 26
Blader online of download pdf Handleiding Service Supplement voor {categorie_naam} Fujitsu PRIMERGY Econel 200 S2. Fujitsu PRIMERGY Econel 200 S2 39 pagina's.
Pagina afdrukken
Replacing the power supply unit
4.5
Replacing the power supply unit
Ê Remove the side cover as described in section "Preparation" on page 17.
Ê Remove the processor fan 2 as described in section "Removing the
processor fan 2" on page 17.
Ê Remove the system fan as described in section "Removing the system fan"
on page 18.
Ê Remove the memory air duct as described in section "Removing the
memory air duct" on page 18.
Ê Disconnect all power supply cables from the system board and from the
drives (see cabling in the Options Guide) and release the cables from the
cable clamps.
Figure 9: Removing the screws
Ê Remove the four screws at the rear side of the server.
26
Service Supplement
Replacement routines
Econel 200 S2