Fujitsu fi-5120C Manuel de démarrage - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Fujitsu fi-5120C. Fujitsu fi-5120C 29 pages. Cleaning and consumable replacement instructions
Également pour Fujitsu fi-5120C : Pour commencer (28 pages), Manuel de procédures d'installation (7 pages), Manuel de procédures d'installation (9 pages), Spécifications (2 pages), Manuel d'instruction (13 pages)

Imprimer la page
Fujitsu fi-5120C Manuel de démarrage
Appendix3
The glass surface inside the
ARNI N G
ADF becomes hot during the
operation. Before replacing the
consumables, turn its power off
and unplug the AC adapter from
the outlet. Wait at least 15 min-
utes.
■ Consumables and Replacement
Cycles
Below are specifications of consumable items and
their recommended replacement cycles.
Parts
Description
Number
Pad ASSY
PA03289-
0111
Pick roller
PA03289-
0001
To purchase consumables, contact the store where you
purchased the scanner or an authorized FUJITSU scan-
ner service provider.
The replacement cycles above are rough guidelines
when using A4 or Letter woodfree or wood containing
paper 64 g/m2 (17 lb). This cycle varies according to the
type of paper and how frequently the scanner is used and
cleaned.
Use only above specified consumables.
ATTENTION
Do not use other consumables.
REPLACING CONSUMABLES
Standard
Replacement Cycle
After 50,000 scans or
one year
After 100,000 sheets
or one year
fi-5120C/fi-5220C Image Scanner Getting Started
The illustration below demonstrates the locations of the
replacement parts. Refer to "Chapter 4 Replacing Con-
sumables" fi-5120C/fi-5220C Operator's Guide on the
Setup CD-ROM.
■ Replacing the Pad ASSY
■ Replacing the Pick Roller
Pick Roller
Pick Roller's Shaft
AP-5