Fujitsu FI-5900C Pour commencer - Page 11

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} Fujitsu FI-5900C. Fujitsu FI-5900C 30 pages. Consumable replacement and cleaning instructions
Également pour Fujitsu FI-5900C : Manuel de procédures d'installation (7 pages), Manuel de procédures d'installation (9 pages), Procédures d'installation (3 pages), Brochure & Specs (2 pages), Manuel complémentaire (4 pages), Pour commencer (30 pages), Brochure & Specs (4 pages), Instructions de remplacement et de nettoyage des consommables (24 pages), Procédure de remplacement (22 pages), Instructions de nettoyage (2 pages)

Imprimer la page
Fujitsu FI-5900C Pour commencer
Operator Panel Overlays are available in
HINT
French, German, Italian, Spanish, Chinese,
Russian and Korean. To change the over-
lay, open the plastic cover.
■ Indications on the Function
Number Display
The following shows the indications on the Function
Number Display.
No.
fi-5900C Image Scanner Getting Started
Descriptions
Lights only one time upon turning on the scanner.
Indicates that the scanner has been turned ON
and is being initialized.
Indicates that initialization has been completed
successfully.
This status is called "Ready Status".
Indicates that a temporary error (that users can
solve) has occurred during the initialization or
scanning of documents.
"U" and an error number (1, 2, 4, 6, 8) are dis-
played alternately.
To return the scanner to the ready status ("1"),
press the "Scan" or "Send to" button while the
error is indicated.
Indicates that a device alarm (that users can not
solve) has occurred during the initialization or
scanning of documents.
"E" and an alarm number (0, 2 to 9, and A, c, d,
F, 10 to 12, 15 to 19, 1A) are indicated alter-
nately.
To return the scanner to the ready status ("1"),
press "Scan" or "Send to" button.
If this alarm occurs, turn the power off and then
on again. If the alarm is indicated after turning on
the power again, contact your service engineer.
3