Fujitsu FI-5900C 시작하기 - 페이지 11

{카테고리_이름} Fujitsu FI-5900C에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-5900C 30 페이지. Consumable replacement and cleaning instructions
Fujitsu FI-5900C에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 브로셔 및 사양 (2 페이지), 보충 설명서 (4 페이지), 시작하기 (30 페이지), 브로셔 및 사양 (4 페이지), 소모품 교체 및 청소 지침 (24 페이지), 교체 절차 (22 페이지), 청소 지침 (2 페이지)

Operator Panel Overlays are available in

HINT

French, German, Italian, Spanish, Chinese,

Russian and Korean. To change the over-

lay, open the plastic cover.

■ Indications on the Function

Number Display

The following shows the indications on the Function

Number Display.

No.

fi-5900C Image Scanner Getting Started

Descriptions

Lights only one time upon turning on the scanner.

Indicates that the scanner has been turned ON

and is being initialized.

Indicates that initialization has been completed

successfully.

This status is called "Ready Status".

Indicates that a temporary error (that users can

solve) has occurred during the initialization or

scanning of documents.

"U" and an error number (1, 2, 4, 6, 8) are dis-

played alternately.

To return the scanner to the ready status ("1"),

press the "Scan" or "Send to" button while the

error is indicated.

Indicates that a device alarm (that users can not

solve) has occurred during the initialization or

scanning of documents.

"E" and an alarm number (0, 2 to 9, and A, c, d,

F, 10 to 12, 15 to 19, 1A) are indicated alter-

nately.

To return the scanner to the ready status ("1"),

press "Scan" or "Send to" button.

If this alarm occurs, turn the power off and then

on again. If the alarm is indicated after turning on

the power again, contact your service engineer.