Fujitsu FI-5900C 청소 지침

{카테고리_이름} Fujitsu FI-5900C에 대한 청소 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-5900C 2 페이지. Consumable replacement and cleaning instructions
Fujitsu FI-5900C에 대해서도 마찬가지입니다: 시작하기 (30 페이지), 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 브로셔 및 사양 (2 페이지), 보충 설명서 (4 페이지), 시작하기 (30 페이지), 브로셔 및 사양 (4 페이지), 소모품 교체 및 청소 지침 (24 페이지), 교체 절차 (22 페이지)

페이지 인쇄
Fujitsu FI-5900C 청소 지침
BEFORE CLEANING
Remove documents from the stacker and open
the ADF
Roller
Cover
Cleaning the Pad -
1.
Open the ADF Cover
2.
Wipe the Pad (the parts of rubber) with cleaning
paper, moistened with F1 cleaner, in the direction
indicated by the arrows.
Cleaning the Rollers -
1.
Open the ADF Cover. Open the Roller cover - grab
the depression on the left and right side with your
fingers and pull towards you to open the cover.
2.
Clean the Pick Roller and the rubber surface of the
Separator Rollers using cleaning paper moistened
with F1 cleaner. Close the Roller Cover after the
cleaning is finished.
Consumables
Pad
ADF
Pick Roller
Cover
Separator Roller
Brake Roller
Cleaning Kit
Pad
Cover
Recommended Cleaning Cycle Every 10,000 Sheets
Recommended Cleaning Cycle Every 10,000 Sheets
Cleaning Instructions for
fi-5900C Scanner
Parts
Note: Please ensure Cleaner F2 is NOT
used on Rubber Rollers.
Pad
Roller
Cover
Part Number
PA03450-K014
PA03450-K011
PA03450-K012
PA03450-K013
SC-CLE-KIT2
Pick
Roller
Separator
Roller
Roller
Cover
P.T.O.