Fujitsu FI-5900C Cleaning Instructions

Browse online or download pdf Cleaning Instructions for Scanner Fujitsu FI-5900C. Fujitsu FI-5900C 2 pages. Consumable replacement and cleaning instructions
Also for Fujitsu FI-5900C: Getting Started (30 pages), Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Installation Procedures (3 pages), Brochure & Specs (2 pages), Supplementary Manual (4 pages), Getting Started (30 pages), Brochure & Specs (4 pages), Consumable Replacement And Cleaning Instructions (24 pages), Replacement Procedure (22 pages)

Print Page
Fujitsu FI-5900C Cleaning Instructions
BEFORE CLEANING
Remove documents from the stacker and open
the ADF
Roller
Cover
Cleaning the Pad -
1.
Open the ADF Cover
2.
Wipe the Pad (the parts of rubber) with cleaning
paper, moistened with F1 cleaner, in the direction
indicated by the arrows.
Cleaning the Rollers -
1.
Open the ADF Cover. Open the Roller cover - grab
the depression on the left and right side with your
fingers and pull towards you to open the cover.
2.
Clean the Pick Roller and the rubber surface of the
Separator Rollers using cleaning paper moistened
with F1 cleaner. Close the Roller Cover after the
cleaning is finished.
Consumables
Pad
ADF
Pick Roller
Cover
Separator Roller
Brake Roller
Cleaning Kit
Pad
Cover
Recommended Cleaning Cycle Every 10,000 Sheets
Recommended Cleaning Cycle Every 10,000 Sheets
Cleaning Instructions for
fi-5900C Scanner
Parts
Note: Please ensure Cleaner F2 is NOT
used on Rubber Rollers.
Pad
Roller
Cover
Part Number
PA03450-K014
PA03450-K011
PA03450-K012
PA03450-K013
SC-CLE-KIT2
Pick
Roller
Separator
Roller
Roller
Cover
P.T.O.