Fujitsu FI-5900C Cleaning Instructions - Page 2

Browse online or download pdf Cleaning Instructions for Scanner Fujitsu FI-5900C. Fujitsu FI-5900C 2 pages. Consumable replacement and cleaning instructions
Also for Fujitsu FI-5900C: Getting Started (30 pages), Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Installation Procedures (3 pages), Brochure & Specs (2 pages), Supplementary Manual (4 pages), Getting Started (30 pages), Brochure & Specs (4 pages), Consumable Replacement And Cleaning Instructions (24 pages), Replacement Procedure (22 pages)

Print Page
Fujitsu FI-5900C Cleaning Instructions
Fujitsu Europe LImited
Cleaning the Rollers -
3.
Open the Pad Cover - grab both sides of the cover,
press to the inside and pull down (towards you).
4.
Remove the Brake Roller. Move the roller slightly to
the right, then pull it upwards to remove. Clean the
rubber surface using cleaning paper moistened with
F1 cleaner. Re-install and close the Pad Cover.
5.
Clean the Feed Rollers
consists of 2 rollers, 9 locations) on the upper side
of the LOWER transport path using cleaning paper
moistened with
F2
6.
Clean the Pinch Rollers
consists of 2 rollers, 9 locations) on the upper side
of the UPPER transport path, using cleaning paper
moistened with
Recommended Cleaning Cycle Every 10,000 Sheets
(metal
rollers, each set
cleaner.
(rubber
rollers, each set
F1
cleaner
For further cleaning instructions please
fi-5900C Image Scanner Operators Guide
which can be found on our Website:
www.fel.fujitsu.com/scanner
Pad Cover
refer to the
Cleaning Instructions for fi-5900
Brake
Roller
Feed
Rollers
Pinch
Rollers
January 2007