A-M Systems 2100 Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} A-M Systems 2100. A-M Systems 2100 19 pages. Isolated pulse stimulator

A-M Systems 2100 Manuel d'instruction
Demonstration of Burst Mode
Connect the output of the Model 2100 to an oscilloscope. Before connecting the Model
2100 to any other instrument, or the experimental preparation, it is safest to turn its
power off.
Set the Output controls:
Range:
Pulse Sign:
Baseline:
Pulse Amplitude:
Baseline Amplitude
Setting The Timing Controls:
Delay:
Burst Width:
Duration:
Period:
Set the START controls as follows:
Mode:
Disconnect any cables to the TRIG or GATE inputs.
Trigger the oscilloscope from the Burst trigger out (upper Trig Out connector) for a
stable display. In each burst (occurring every l00ms), you should observe a trio of
15ms duration starting 50ms apart. Try switching the Start/Mode from Free Run to the
center (normal) position. The pulses will no longer be produced, and the Trig and
Event indicators will turn off. Pressing this switch once (to Manual) will cause a single
burst to occur.
A-M Systems
131 Business Park Loop, P.O. Box 850 Carlsborg, WA 98324
Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525
E-mail: [email protected] * Website:
10V
+
-
2.00
1.00
8.80 * 10
-2
-2
1.20 * 10
-2
1.50 * 10
5.00 * 10
-2
Free Run
http://www.a-msystems.com
7