Brother HL-2270DW Manuel d'installation rapide - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother HL-2270DW. Brother HL-2270DW 36 pages. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Également pour Brother HL-2270DW : Manuel d'installation rapide (36 pages), Manuel de l'utilisateur du réseau (47 pages), Manuel d'installation (5 pages), Manuel d'installation rapide (35 pages), Faq et dépannage (6 pages)

Wireless Network

The machine LED's will indicate the connection

results. See LED indications when using the

one-push wireless setting mode on page 33.

A WLAN report will automatically be printed. If

the connection failed, check the error on the

printed report and refer to

Troubleshooting on page 28

Click Next.

Check the box after you confirm that you have

completed the wireless settings, and then click

Next.

Install the printer driver

IMPORTANT

DO NOT try to cancel any of the screens

during this installation.

Note

• If there is more than one of the same model

connected on your network, the MAC Address

(Ethernet Address) will be displayed after the

model name. You can also confirm your IP

Address by scrolling to the right.

• You can find your machine's MAC Address

(Ethernet Address) and the IP Address by

printing out the Printer Settings Page. See Print

the Printer Settings Page on page 31.

Follow the on-screen instructions to complete

setup.

Note

When the Brother Support screen appears,

make your selection and follow the on-screen

instructions.

The installation is now

Finish

complete.

Note

If you use a specified IP Address for the machine,

you must set the Boot Method to Static by using

the BRAdmin Light. For more information, See

Changing your machine's network settings in the

Network User's Guide.

Macintosh