Brother HL-2270DW 빠른 설정 매뉴얼 - 페이지 23
{카테고리_이름} Brother HL-2270DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-2270DW 36 페이지. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Brother HL-2270DW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (36 페이지), 네트워크 사용 설명서 (47 페이지), 설치 매뉴얼 (5 페이지), 빠른 설정 매뉴얼 (35 페이지), 자주 묻는 질문 및 문제 해결 (6 페이지)
페이지 인쇄
Wireless Network
j
The machine LED's will indicate the connection
results. See LED indications when using the
one-push wireless setting mode on page 33.
A WLAN report will automatically be printed. If
the connection failed, check the error on the
printed report and refer to
Troubleshooting on page 28
k
Click Next.
l
Check the box after you confirm that you have
completed the wireless settings, and then click
Next.
Install the printer driver
IMPORTANT
DO NOT try to cancel any of the screens
during this installation.
Note
• If there is more than one of the same model
connected on your network, the MAC Address
(Ethernet Address) will be displayed after the
model name. You can also confirm your IP
Address by scrolling to the right.
• You can find your machine's MAC Address
(Ethernet Address) and the IP Address by
printing out the Printer Settings Page. See Print
the Printer Settings Page on page 31.
m
Follow the on-screen instructions to complete
setup.
Note
When the Brother Support screen appears,
make your selection and follow the on-screen
instructions.
The installation is now
Finish
complete.
Note
If you use a specified IP Address for the machine,
you must set the Boot Method to Static by using
the BRAdmin Light. For more information, See
Changing your machine's network settings in the
Network User's Guide.
Macintosh
23