Fujitsu eternus af Manuel de configuration - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu eternus af. Fujitsu eternus af 25 pages. Fibre channel for citrix xenserver
Également pour Fujitsu eternus af : Manuel de configuration (28 pages), Manuel de configuration (32 pages), Manuel de configuration (43 pages)
![Fujitsu eternus af Manuel de configuration](/uploads/products/server2/2442740/2442740.jpg)
Chapter 8
Setting Up Oracle VM Server
8.1
Setting Up the Fibre Channel Cards
1
Perform the following driver parameter settings for each model of ETERNUS DX/AF that is to be connec-
ted.
Driver parameter
lpfc_lun-queue-depth
lpfc_topology
lpfc_link-speed
*1: Recommended value = 1024 ¸ (number of Fibre Channel ports that are connected to a single CA
port) ¸ number of LUNs
(Round the result down)
•
Use the value of "8" if the actual result is lower. Use the maximum value if the actual result ex-
ceeds the maximum value of the OS or the driver.
To achieve maximum system performance, this value can be changed according to the server
•
load and the peak operating times.
The number of simultaneous command executions per CA port for the ETERNUS DX/AF is limited
•
to 1024. This value is used by multiple servers that share the CA port. A maximum of 1024 com-
mands can be executed per CA port.
*2: Use the following "lpfc_link_speed" setting values.
Fibre
Channel
card
transfer
rate
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
2
Shut down the server.
After the driver parameter settings are complete, shut down the Oracle VM Server, and then connect the
ETERNUS DX/AF to the server with cables.
8.1.2
For QLogic Fibre Channel Cards
This section explains how to install QLogic Fibre Channel cards in the Oracle VM Server host and how to con-
nect the ETERNUS DX/AF.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86
Setting value
Arbitrary (*1)
(Up to 1024 for each FC port of the ETERNUS DX/AF)
For direct connections: 4
•
•
For switch connections: 2
When a direct connection is used and the LinkSpeed is 16Gbit/s, select "2".
(*2)
Switch connection
Fibre Channel switch transfer rate
32Gbit/s
16Gbit/s
8Gbit/s
16
16
8
8
8
8
—
4
4
—
—
2
16
Copyright 2017 FUJITSU LIMITED
4Gbit/s
2Gbit/s
1Gbit/s
4
—
—
4
2
—
4
2
1
2
2
1
Direct connection
CA transfer rate
16Gbit/s
8Gbit/s
4Gbit/s
16
8
4
8
8
4
4
4
4
—
2
2
P3AM-6612-14ENZ0