Fujitsu eternus af Manual de configuração - Página 16

Procurar online ou descarregar pdf Manual de configuração para Armazenamento Fujitsu eternus af. Fujitsu eternus af 25 páginas. Fibre channel for citrix xenserver
Também para Fujitsu eternus af: Manual de configuração (28 páginas), Manual de configuração (32 páginas), Manual de configuração (43 páginas)

Fujitsu eternus af Manual de configuração
Chapter 8
Setting Up Oracle VM Server
8.1
Setting Up the Fibre Channel Cards
1
Perform the following driver parameter settings for each model of ETERNUS DX/AF that is to be connec-
ted.
Driver parameter
lpfc_lun-queue-depth
lpfc_topology
lpfc_link-speed
*1: Recommended value = 1024 ¸ (number of Fibre Channel ports that are connected to a single CA
port) ¸ number of LUNs
(Round the result down)
Use the value of "8" if the actual result is lower. Use the maximum value if the actual result ex-
ceeds the maximum value of the OS or the driver.
To achieve maximum system performance, this value can be changed according to the server
load and the peak operating times.
The number of simultaneous command executions per CA port for the ETERNUS DX/AF is limited
to 1024. This value is used by multiple servers that share the CA port. A maximum of 1024 com-
mands can be executed per CA port.
*2: Use the following "lpfc_link_speed" setting values.
Fibre
Channel
card
transfer
rate
16Gbit/s
8Gbit/s
4Gbit/s
2Gbit/s
2
Shut down the server.
After the driver parameter settings are complete, shut down the Oracle VM Server, and then connect the
ETERNUS DX/AF to the server with cables.
8.1.2

For QLogic Fibre Channel Cards

This section explains how to install QLogic Fibre Channel cards in the Oracle VM Server host and how to con-
nect the ETERNUS DX/AF.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86
Setting value
Arbitrary (*1)
(Up to 1024 for each FC port of the ETERNUS DX/AF)
For direct connections: 4
For switch connections: 2
When a direct connection is used and the LinkSpeed is 16Gbit/s, select "2".
(*2)
Switch connection
Fibre Channel switch transfer rate
32Gbit/s
16Gbit/s
8Gbit/s
16
16
8
8
8
8
4
4
2
16
Copyright 2017 FUJITSU LIMITED
4Gbit/s
2Gbit/s
1Gbit/s
4
4
2
4
2
1
2
2
1
Direct connection
CA transfer rate
16Gbit/s
8Gbit/s
4Gbit/s
16
8
4
8
8
4
4
4
4
2
2
P3AM-6612-14ENZ0