Fujitsu eternus af Manual de configuração - Página 15
Procurar online ou descarregar pdf Manual de configuração para Armazenamento Fujitsu eternus af. Fujitsu eternus af 25 páginas. Fibre channel for citrix xenserver
Também para Fujitsu eternus af: Manual de configuração (28 páginas), Manual de configuração (32 páginas), Manual de configuração (43 páginas)
![Fujitsu eternus af Manual de configuração](/uploads/products/server2/2442740/2442740.jpg)
Chapter 8
Setting Up Oracle VM Server
Set up Oracle VM Server to connect the ETERNUS DX/AF.
The settings described in this chapter are performed using Oracle VM Manager. Prepare a Oracle VM Manager
environment before setting up Oracle VM Server. For details on how to install and operate Oracle VM Manag-
er, refer to the Oracle documents.
8.1
Setting Up the Fibre Channel Cards
Perform Fibre Channel card settings.
8.1.1
For Emulex Fibre Channel Cards
This section explains how to install Emulex Fibre Channel cards in the Oracle VM Server host and how to con-
nect the ETERNUS DX/AF.
Since the standard driver that is supplied with the OS is used for the Fibre Channel driver, other drivers do
not need to be installed.
Use the following procedure to set the drive parameters.
Use an editor such as "vi" to add the setting values to the configuration file.
Configuration file
•
OS
Oracle VM Server 3.3
Oracle VM Server 3.2
Oracle VM Server 3.1
Note that the setting values and items vary depending on the ETERNUS DX/AF that is used.
Example:
•
options lpfc lpfc_lun_queue_depth=8 lpfc_link_speed=8 lpfc_topology=2
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86
Configuration file
Any file (.conf) in /etc/modprobe.d/
/etc/modprobe.conf
/etc/modprobe.conf
15
Copyright 2017 FUJITSU LIMITED
P3AM-6612-14ENZ0