Fujitsu ETERNUS DX Disk Manuel de configuration - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 29 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Également pour Fujitsu ETERNUS DX Disk : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel de configuration (28 pages), Manuel de configuration (44 pages), Manuel de configuration (28 pages), Manuel de configuration (25 pages), Manuel de configuration (32 pages), Manuel de configuration (35 pages), Manuel de configuration (31 pages), Manuel de configuration (43 pages), Manuel de configuration (21 pages), Manuel de configuration (24 pages)

Imprimer la page

Fujitsu ETERNUS DX Disk Manuel de configuration

Chapter 6

Required Driver Parameters

6.1

Setting Up the Parameters

Setting value (for

Parameter

direct connection)

max-throt-

Arbitrary (*2)

tle

(Up to 512 for each

FC port of the ETER-

NUS DX/AF)

*1: It is recommended that the link speed be set to a fixed value, rather than the auto negotiation setting.

*2: Recommended value = 512 ¸ (number of Fibre Channel ports that are connected to a single CA port) ¸

number of LUNs

(Round the result down)

Use the value of "8" if the actual result is lower.

When multiple parameters are required for one item, delimit them with commas. Put a semicolon (;) at

•

the end of the line to close the item.

Perform these settings for all instances connected to the ETERNUS DX/AF storage systems. For the fcp-

•

bind-target setting, see the target binding table.

Channel Adapter name SCSI T-ID

CM0CA0Port0

CM1CA0Port0

fcp-bind-target="fjpfca0t0:DX400_CM0CA0P0","fjpfca1t0:DX400_CM1CA0P0";

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

Setting value

Remarks

(for switch connec-

tion)

Arbitrary (*2) (Up to

Set the maximum number of SCSI commands (tags) to be issued.

512 for each FC port

max-throttle="Instance name + Target ID:Setting value". Define

of the ETERNUS

the instance name and target ID in sequentializing.

DX/AF)

Specify this for all the ETERNUS DX/AF storage systems' access

paths.

The "max-throttle-all" property does not need to be set.

Alias name (WWN)

DX400_CM0CA0P0

DX400_CM1CA0P0

Instance name

fjpfca0

fjpfca1

P3AM-3712-15ENZ0