Fujitsu ETERNUS DX Disk Manuel de configuration - Page 24

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 29 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Également pour Fujitsu ETERNUS DX Disk : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel de configuration (28 pages), Manuel de configuration (44 pages), Manuel de configuration (28 pages), Manuel de configuration (25 pages), Manuel de configuration (32 pages), Manuel de configuration (35 pages), Manuel de configuration (31 pages), Manuel de configuration (43 pages), Manuel de configuration (21 pages), Manuel de configuration (24 pages)

Imprimer la page

Fujitsu ETERNUS DX Disk Manuel de configuration

Chapter 6

Required Driver Parameters

6.1

Setting Up the Parameters

6.1.2

"/kernel/drv/fjpfca.conf" Example

•

Description example for ETERNUS DX400/DX400 S2 series

#ident "@(#)$Id: fjpfca.conf,v 1.3 2000/05/30 13:59:43 ueno Exp $ FUJITSU"

# The fjpfca driver support connection to NL_port(FC-AL) and

# F_Port/FL_Port(fabric).

# It is necessary to define "port" property in order to communicate

# with the fabric or N_port target. In addition, it is necessary

# to define "fcp-bind-target" property in order to communicate

# with the fabric. These need not be defined for FC-AL.

# Other properties like "alias" and "max-throttle" are optional.

# Alias name definition

# You can create an alias definition for a specific WWN

# with "alias" property.

# SYNOPSIS:

# alias="alias-name:wwn", ...;

# EXAMPLE:

# alias="TARGET_A:0x100000a0b8030001","TARGET_B:0x100000a0b8030002";

#alias=

# "TARGET_0A:0x100000a0b8030001",

# "TARGET_1A:0x100000a0b8030002",

# "TARGET_0B:0x100000a0b8030003",

# "TARGET_1B:0x100000a0b8030004";

alias= "DX400_CM0CA0P0:0x202000e000cb0001",

"DX400_CM1CA0P0:0x203000e000cb0001";

# Port type definition

# The port type definition sets the port mode for a specific instance.

# If the "port" property is not defined, the fjpfca driver

# will determine the port mode automatically during the initialization.

# SYNOPSIS:

# port="instance-name:[nport|loop]", ...;

# EXAMPLE:

# port="fjpfca0:nport","fjpfca1:loop";

#port=

# "fjpfca0:nport",

# "fjpfca1:nport",

# "fjpfca2:nport",

# "fjpfca3:nport";

port= "fjpfca0:nport:sp4",

"fjpfca1:nport:sp4";

# Target binding definition

# fcp-bind-target binds a specific instance to a target ID.

# You can use defined alias in "alias" property for the WWN.

# SYNOPSIS:

# fcp-bind-target="[target-name:[wwn|alias-name]]", ...;

# EXAMPLE:

# fcp-bind-target= "fjpfca0t0:0x100000a0b8030001","fjpfca1t0:TARGET_B";

#fcp-bind-target=

# "fjpfca0t0:0x100000a0b8030001",

# "fjpfca0t1:0x100000a0b8030003",

# "fjpfca1t0:TARGET_1A",

# "fjpfca1t1:TARGET_1B";

fcp-bind-target= "fjpfca0t0:DX400_CM0CA0P0",

# Number of maximum commands per target definition

# The driver uses the value specified by the max-throttle property

# as a number a target of commands which can be issued simultaneously.

# SYNOPSIS:

# max-throttle="[target-name:number]", ...;

# EXAMPLE:

# max-throttle="fjpfca0t0:240","fjpfca1t0:240";

#max-throttle=

# "fjpfca0t0:240",

# "fjpfca0t1:128",

# "fjpfca1t0:240",

# "fjpfca1t1:128";

max-throttle= "fjpfca0t0:255",

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

For direct connections, set this parameter if required.

For direct connections, this setting is not required.

"fjpfca1t0:DX400_CM1CA0P0";

For both direct connections and switch connections, add this setting.

"fjpfca1t0:255";

P3AM-3712-15ENZ0