Fujitsu ETERNUS DX Disk 구성 매뉴얼 - 페이지 24

{카테고리_이름} Fujitsu ETERNUS DX Disk에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX Disk 29 페이지. Server connection, fcoe for linux driver settings for converged network adapter cards
Fujitsu ETERNUS DX Disk에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 사용자 설명서 (42 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (44 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (35 페이지), 구성 매뉴얼 (31 페이지), 구성 매뉴얼 (43 페이지), 구성 매뉴얼 (21 페이지), 구성 매뉴얼 (24 페이지)

페이지 인쇄

Chapter 6

Required Driver Parameters

6.1

Setting Up the Parameters

6.1.2

"/kernel/drv/fjpfca.conf" Example

•

Description example for ETERNUS DX400/DX400 S2 series

#ident "@(#)$Id: fjpfca.conf,v 1.3 2000/05/30 13:59:43 ueno Exp $ FUJITSU"

# The fjpfca driver support connection to NL_port(FC-AL) and

# F_Port/FL_Port(fabric).

# It is necessary to define "port" property in order to communicate

# with the fabric or N_port target. In addition, it is necessary

# to define "fcp-bind-target" property in order to communicate

# with the fabric. These need not be defined for FC-AL.

# Other properties like "alias" and "max-throttle" are optional.

# Alias name definition

# You can create an alias definition for a specific WWN

# with "alias" property.

# SYNOPSIS:

# alias="alias-name:wwn", ...;

# EXAMPLE:

# alias="TARGET_A:0x100000a0b8030001","TARGET_B:0x100000a0b8030002";

#alias=

# "TARGET_0A:0x100000a0b8030001",

# "TARGET_1A:0x100000a0b8030002",

# "TARGET_0B:0x100000a0b8030003",

# "TARGET_1B:0x100000a0b8030004";

alias= "DX400_CM0CA0P0:0x202000e000cb0001",

"DX400_CM1CA0P0:0x203000e000cb0001";

# Port type definition

# The port type definition sets the port mode for a specific instance.

# If the "port" property is not defined, the fjpfca driver

# will determine the port mode automatically during the initialization.

# SYNOPSIS:

# port="instance-name:[nport|loop]", ...;

# EXAMPLE:

# port="fjpfca0:nport","fjpfca1:loop";

#port=

# "fjpfca0:nport",

# "fjpfca1:nport",

# "fjpfca2:nport",

# "fjpfca3:nport";

port= "fjpfca0:nport:sp4",

"fjpfca1:nport:sp4";

# Target binding definition

# fcp-bind-target binds a specific instance to a target ID.

# You can use defined alias in "alias" property for the WWN.

# SYNOPSIS:

# fcp-bind-target="[target-name:[wwn|alias-name]]", ...;

# EXAMPLE:

# fcp-bind-target= "fjpfca0t0:0x100000a0b8030001","fjpfca1t0:TARGET_B";

#fcp-bind-target=

# "fjpfca0t0:0x100000a0b8030001",

# "fjpfca0t1:0x100000a0b8030003",

# "fjpfca1t0:TARGET_1A",

# "fjpfca1t1:TARGET_1B";

fcp-bind-target= "fjpfca0t0:DX400_CM0CA0P0",

# Number of maximum commands per target definition

# The driver uses the value specified by the max-throttle property

# as a number a target of commands which can be issued simultaneously.

# SYNOPSIS:

# max-throttle="[target-name:number]", ...;

# EXAMPLE:

# max-throttle="fjpfca0t0:240","fjpfca1t0:240";

#max-throttle=

# "fjpfca0t0:240",

# "fjpfca0t1:128",

# "fjpfca1t0:240",

# "fjpfca1t1:128";

max-throttle= "fjpfca0t0:255",

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

For direct connections, set this parameter if required.

For direct connections, this setting is not required.

"fjpfca1t0:DX400_CM1CA0P0";

For both direct connections and switch connections, add this setting.

"fjpfca1t0:255";

P3AM-3712-15ENZ0