Fujitsu ETERNUS DX Disk Manuel de configuration - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 35 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Également pour Fujitsu ETERNUS DX Disk : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel de configuration (28 pages), Manuel de configuration (44 pages), Manuel de configuration (28 pages), Manuel de configuration (29 pages), Manuel de configuration (25 pages), Manuel de configuration (32 pages), Manuel de configuration (31 pages), Manuel de configuration (43 pages), Manuel de configuration (21 pages), Manuel de configuration (24 pages)

Imprimer la page

Fujitsu ETERNUS DX Disk Manuel de configuration

Chapter 1

Setup Procedure for Emulex Converged Network Adapter Cards

1.2

Setting Up the Converged Network Adapter Cards

The window shown in

In this example, check that item #1 is listed as "Used", that the "WWPN" is set to the actual ETERNUS

DX400 series WWPN, and that the "LUN" is set to "00" and that it bears the "Primary Boot" label.

-------------------------------------------------------------------------------

01:

Mem Base:

Port Name:

Vlan ID:

-------------------------------------------------------------------------------

===> Enter <Esc> to Previous Menu

Press the [Esc] key twice to return to the window shown in

If the Converged Network Adapter card has a dual port, or if multiple Converged Network Adapter cards

to be installed, repeat

Press the [Esc] key to reboot.

--------------------------------------------------------

Reboot the system for all changes to take effect.

--------------------------------------------------------

===> Y

1.2.3

Installing VMware ESX

VMware ESX should be installed now if it has not yet been installed in the server. Refer to the following

•

URL for details.

http://www.vmware.com/support/pubs

Converged Network Adapter card driver should be downloaded and installed from the following URL:

•

https://my.vmware.com/web/vmware/downloads

1.2.4

Setting Up the Converged Network Adapter Card Driver

Change the parameters for the Converged Network Adapter card driver.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for VMware

Step 7

reappears.Check the settings.

Emulex OneConnect FCoE BIOS Utility, xxxxxxxx

OCexxxxx-F:

CD4C0000

Firmware Version:

xxxxxxxx xxxxxxxx

xxxx

DCBX mode:

CEE mode

List of Saved Boot Devices:

1. Used

DID:xxxxxx WWPN:2040000B 5D6A0012 LUN:00

2. Unused