Fujitsu ETERNUS DX Disk Manuel de configuration - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 31 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Également pour Fujitsu ETERNUS DX Disk : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel de configuration (28 pages), Manuel de configuration (44 pages), Manuel de configuration (28 pages), Manuel de configuration (29 pages), Manuel de configuration (25 pages), Manuel de configuration (32 pages), Manuel de configuration (35 pages), Manuel de configuration (43 pages), Manuel de configuration (21 pages), Manuel de configuration (24 pages)

Imprimer la page

Fujitsu ETERNUS DX Disk Manuel de configuration

Chapter 3

Notes

3.10

Notes about Connections with a Windows Server

●

Measure to take after a problem occurs

Manually change the offline disks to online with the following procedure.

Click the [Start] button, select [Computer Management] under [Administrative Tools] and then select

[Manage Discs] (or [Disk Management]) in the left pane.

Select each offline disk, then right-click the selected disk to change the status to online.

If a firmware update of the ETERNUS DX is performed in a Hyper-V environment where a pass-through disk is

configured for the guest OS, the disk is recognized as a new disk and the pass-through disk is removed from

the physical hard disk. Therefore, the pass-through disk must be manually reconfigured to be restored.

The procedure for restoring (or reconfiguring) the disk is as follows:

Start "Hyper-V Manager".

Select the offline guest OS and click [Settings] in the right pane.

The settings pop-up for the guest OS appears.

In the settings pop-up under [SCSI Controller], select the hard drive that has the message "Physical

drive not found".

Select the appropriate disk for the [Physical hard disk] area in the right side of the window.

Click the [OK] button.

●

SAN Policy supported OSs

•

Windows Server

•

Windows Server

•

Windows Server

•

Windows Server

•

Windows Server

•

Windows Server

●

SAN Policy default value

Windows Server

2019

2016

2012 R2

2012

2008 R2

2008

2019 (all editions)

2016 (all editions)

2012 R2 (all editions)

2012 (all editions)

2008 R2 Datacenter

2008 R2 Enterprise

2008 Datacenter

2008 Enterprise

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows

SAN Policy default value

Offline Shared

P3AM-3442-18ENZ0