Fujitsu ETERNUS DX Disk Manuale di configurazione - Pagina 14

Sfoglia online o scarica il pdf Manuale di configurazione per Immagazzinamento Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 31. Server connection, fcoe for linux driver settings for converged network adapter cards
Anche per Fujitsu ETERNUS DX Disk: Manuale d'uso (35 pagine), Manuale d'uso (42 pagine), Manuale di configurazione (28 pagine), Manuale di configurazione (44 pagine), Manuale di configurazione (28 pagine), Manuale di configurazione (29 pagine), Manuale di configurazione (25 pagine), Manuale di configurazione (32 pagine), Manuale di configurazione (35 pagine), Manuale di configurazione (43 pagine), Manuale di configurazione (21 pagine), Manuale di configurazione (24 pagine)

Stampa la pagina
Fujitsu ETERNUS DX Disk Manuale di configurazione
Chapter 3
Notes
3.10
Notes about Connections with a Windows Server
●
Measure to take after a problem occurs
Manually change the offline disks to online with the following procedure.
1
Click the [Start] button, select [Computer Management] under [Administrative Tools] and then select
[Manage Discs] (or [Disk Management]) in the left pane.
2
Select each offline disk, then right-click the selected disk to change the status to online.
If a firmware update of the ETERNUS DX is performed in a Hyper-V environment where a pass-through disk is
configured for the guest OS, the disk is recognized as a new disk and the pass-through disk is removed from
the physical hard disk. Therefore, the pass-through disk must be manually reconfigured to be restored.
The procedure for restoring (or reconfiguring) the disk is as follows:
1
Start "Hyper-V Manager".
2
Select the offline guest OS and click [Settings] in the right pane.
The settings pop-up for the guest OS appears.
3
In the settings pop-up under [SCSI Controller], select the hard drive that has the message "Physical
drive not found".
4
Select the appropriate disk for the [Physical hard disk] area in the right side of the window.
5
Click the [OK] button.
●
SAN Policy supported OSs
•
Windows Server
•
Windows Server
•
Windows Server
•
Windows Server
•
Windows Server
•
Windows Server
●
SAN Policy default value
OS
Windows Server
Windows Server
Windows Server
Windows Server
Windows Server
Windows Server
Windows Server
Windows Server
®
®
2019
®
2016
®
2012 R2
®
2012
®
2008 R2
®
2008
®
2019 (all editions)
®
2016 (all editions)
®
2012 R2 (all editions)
®
2012 (all editions)
®
2008 R2 Datacenter
®
2008 R2 Enterprise
®
2008 Datacenter
®
2008 Enterprise
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows
Copyright 2020 FUJITSU LIMITED
SAN Policy default value
Offline Shared
14
®
P3AM-3442-18ENZ0