Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Manuel de configuration - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF. Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF 29 pages. Fibre channel/ eternus dx500 s4/dx600 s4, eternus dx500 s3/dx600 s3, eternus dx8700 s3 hybrid storage systems, eternus dx400 s2 series, eternus dx8700 s2 disk storage systems, eternus af650 s2, eternus af650 all-flash arrays settings for bs2000 connection
Imprimer la page
Chapter 2
Notes
2.1
Installation Notes
•
To ensure reliable access to ETERNUS DX/AF storage systems, multipath configuration is recommended.
•
Setting up multiple access paths between the BS2000 Server and the ETERNUS DX/AF storage systems
provides improved access redundancy.
•
Before setting up a multipath configuration, create Storage Repositories for all the LUNs that exist in the
ETERNUS DX/AF storage system.
•
The ETERNUS Multipath Driver does not need to be installed for BS2000 Servers.
2.2
ETERNUS DX/AF Storage System Setup Notes
•
Host Response must be set before the ETERNUS DX/AF storage system is connected to the BS2000 Server
host.
•
Assign Affinity Group values starting from LUN0 in ascending order. The server cannot recognize the
ETERNUS DX/AF storage system LUNs if some other assignment order is used.
•
Please be aware that only a homogeneous sharing with other BS2000 Servers is supported for FC Ports
which are connected to a BS2000 server. The combined Port Mode CA/RA and port sharing with non-
BS2000 servers are not supported in ETERNUS DX S2.
The combined Port Mode CA/RA as of ETERNUS DX S4/S3, ETERNUS AF is tolerated.
Note: In these terms the Server Unit of an SE Server (SU x86) or an SQ-Server is considered to be a BS2000
server, irrespective whether Linux/Windows guests are running or not. The Application Unit of an SE Server
or an SQ-Server is a non-BS2000 server.
•
The feature Transparent failover (TFO) / Storage Cluster Option is supported for BS2000 volumes as of OSD/
BC V10 and OSD/XC V10 with SHC-OSD V13.0.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
10
Copyright 2018 FUJITSU LIMITED
P3AM-5672-10ENZ0