Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Yapılandırma Kılavuzu - Sayfa 10

Depolama Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF 29 sayfaları. Fibre channel/ eternus dx500 s4/dx600 s4, eternus dx500 s3/dx600 s3, eternus dx8700 s3 hybrid storage systems, eternus dx400 s2 series, eternus dx8700 s2 disk storage systems, eternus af650 s2, eternus af650 all-flash arrays settings for bs2000 connection

Sayfayı Yazdır
Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Yapılandırma Kılavuzu
Chapter 2
Notes
2.1

Installation Notes

•
To ensure reliable access to ETERNUS DX/AF storage systems, multipath configuration is recommended.
•
Setting up multiple access paths between the BS2000 Server and the ETERNUS DX/AF storage systems
provides improved access redundancy.
•
Before setting up a multipath configuration, create Storage Repositories for all the LUNs that exist in the
ETERNUS DX/AF storage system.
•
The ETERNUS Multipath Driver does not need to be installed for BS2000 Servers.
2.2

ETERNUS DX/AF Storage System Setup Notes

•
Host Response must be set before the ETERNUS DX/AF storage system is connected to the BS2000 Server
host.
•
Assign Affinity Group values starting from LUN0 in ascending order. The server cannot recognize the
ETERNUS DX/AF storage system LUNs if some other assignment order is used.
•
Please be aware that only a homogeneous sharing with other BS2000 Servers is supported for FC Ports
which are connected to a BS2000 server. The combined Port Mode CA/RA and port sharing with non-
BS2000 servers are not supported in ETERNUS DX S2.
The combined Port Mode CA/RA as of ETERNUS DX S4/S3, ETERNUS AF is tolerated.
Note: In these terms the Server Unit of an SE Server (SU x86) or an SQ-Server is considered to be a BS2000
server, irrespective whether Linux/Windows guests are running or not. The Application Unit of an SE Server
or an SQ-Server is a non-BS2000 server.
•
The feature Transparent failover (TFO) / Storage Cluster Option is supported for BS2000 volumes as of OSD/
BC V10 and OSD/XC V10 with SHC-OSD V13.0.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
10
Copyright 2018 FUJITSU LIMITED
P3AM-5672-10ENZ0