Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Manuel de configuration - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF. Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF 29 pages. Fibre channel/ eternus dx500 s4/dx600 s4, eternus dx500 s3/dx600 s3, eternus dx8700 s3 hybrid storage systems, eternus dx400 s2 series, eternus dx8700 s2 disk storage systems, eternus af650 s2, eternus af650 all-flash arrays settings for bs2000 connection
Imprimer la page
Chapter 3 Checking Prerequisites and Fibre Channel Card Information
3.3 BS2000 Software Prerequisites
3.3
BS2000 Software Prerequisites
Support of the ETERNUS DX Storage Systems is provided as of the following versions:
■
ETERNUS DX S2/S3:
•
SE Server:
•
S-Server:
•
SQ-Server:
■
ETERNUS AF650/AF650 S2/ETERNUS DX S4:
•
SE Server:
•
S-Server:
Correction Package 1/2017
3.4
Fibre Channel Cards
Obtain the WWN information of the Fibre Channel card of a BS2000 Server.
SE Server:
Obtain the WWN via the Management Unit (MU):
-
Select "Units" in the dashboard
-
Expand the Server Unit
-
Select "Information" --> "FC Interfaces", see column "WWPN"
S-Server:
Obtain the WWN from S-Servers via the SKP:
-
open SVP-FRAME
-
execute MODE SELECTION FRAME
-
select CH (CH/SUBCH STATUS) and call the CH/SUBCH STATUS DISPLAY FRAME
-
execute Function 4 (FC PORT STATUS):
-
the field SELF P-NAME shows the WWN
SQ-Server:
Use the command below to get the WWN:
chk_conf -c
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
OSD/XC V9.5, SHC-OSD V11.0
OSD/BC V9.0, SHC-OSD V11.0
OSD/XC V9.0, SHC-OSD V11.0
SE V6.2, OSD/XC V10.0, SHC-OSD V13.0
OSD/BC V10.0, SHC-OSD V13.0
13
Copyright 2018 FUJITSU LIMITED
P3AM-5672-10ENZ0