Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF 구성 매뉴얼 - 페이지 13

{카테고리_이름} Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF 29 페이지. Fibre channel/ eternus dx500 s4/dx600 s4, eternus dx500 s3/dx600 s3, eternus dx8700 s3 hybrid storage systems, eternus dx400 s2 series, eternus dx8700 s2 disk storage systems, eternus af650 s2, eternus af650 all-flash arrays settings for bs2000 connection

Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF 구성 매뉴얼
Chapter 3 Checking Prerequisites and Fibre Channel Card Information

3.3 BS2000 Software Prerequisites

3.3
BS2000 Software Prerequisites
Support of the ETERNUS DX Storage Systems is provided as of the following versions:
ETERNUS DX S2/S3:
SE Server:
S-Server:
SQ-Server:
ETERNUS AF650/AF650 S2/ETERNUS DX S4:
SE Server:
S-Server:
Correction Package 1/2017
3.4

Fibre Channel Cards

Obtain the WWN information of the Fibre Channel card of a BS2000 Server.
SE Server:
Obtain the WWN via the Management Unit (MU):
-
Select "Units" in the dashboard
-
Expand the Server Unit
-
Select "Information" --> "FC Interfaces", see column "WWPN"
S-Server:
Obtain the WWN from S-Servers via the SKP:
-
open SVP-FRAME
-
execute MODE SELECTION FRAME
-
select CH (CH/SUBCH STATUS) and call the CH/SUBCH STATUS DISPLAY FRAME
-
execute Function 4 (FC PORT STATUS):
-
the field SELF P-NAME shows the WWN
SQ-Server:
Use the command below to get the WWN:
chk_conf -c
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
OSD/XC V9.5, SHC-OSD V11.0
OSD/BC V9.0, SHC-OSD V11.0
OSD/XC V9.0, SHC-OSD V11.0
SE V6.2, OSD/XC V10.0, SHC-OSD V13.0
OSD/BC V10.0, SHC-OSD V13.0
13
Copyright 2018 FUJITSU LIMITED
P3AM-5672-10ENZ0