Fujitsu Eternus DX90 S2 Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 18 pages. Server connection. (fibre channel) for aix
Également pour Fujitsu Eternus DX90 S2 : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Instal Setup (20 pages), Manuel de configuration Connexion au serveur (13 pages), Installation du matériel (23 pages), Manuel de configuration (28 pages), Manuel de configuration (15 pages), Manuel de configuration (38 pages)

Install the controller enclosure or the drive enclosure in the rack.

Make sure to install or remove the controller enclosure or the drive enclosure to or from a rack with two or

IMPORTANT

more people.

Fasten the controller enclosure or the drive enclosure in the rack.

Use four M5 screws to fasten the controller enclosure or the drive enclosure to the rack pillars and attach the

flange cover.

M5 screws

Flange cover

Attach the brackets to the rack rails (for the left and right sides).

Use the thumb screws to attach the brackets at the specified locations on the rear side.

Left

2.5" controller

enclosure

2.5" drive

enclosure

ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First

M5 screws

Flange cover

Attachment location of the bracket

Right

3.5" controller

enclosure

3.5" drive

enclosure

3.5" controller

2.5" controller

enclosure

2.5" drive

enclosure

Bracket

Thumb screw

P3AM-4872-11EN