Fujitsu Eternus DX90 S2 Manuel de configuration - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 15 pages. Server connection. (fibre channel) for aix
Également pour Fujitsu Eternus DX90 S2 : Manuel de l'utilisateur (35 pages), Manuel de l'utilisateur (42 pages), Manuel (18 pages), Instal Setup (20 pages), Manuel de configuration Connexion au serveur (13 pages), Installation du matériel (23 pages), Manuel de configuration (28 pages), Manuel de configuration (38 pages)

Imprimer la page
Fujitsu Eternus DX90 S2 Manuel de configuration
Chapter 1
Workflow
Setting the CA Port Groups
Create a group of ports for each CA type.
"2.1.5 Setting the CA Port Groups" (page 11)
•
Setting the FC Host
Register the WWNs of the accessing Fibre Channel cards.
"2.1.6 Registering the WWNs of the Accessing Fibre Channel Cards (Setting FC Host)" (page 11)
•
Setting the Host Affinity
Define the relationship between the FC host, the CA port group, and the LUN group.
•
"2.1.7 Allocating LUN Groups (Setting the Host Affinity)" (page 12)
Setting the Specific Parameters
Set the required parameters according to the OS and the connection configuration.
"2.2 Specific Settings" (page 12)
•
Checking the WWNs
Check information that is necessary for connecting to the server.
"2.3 Checking the WWNs" (page 13)
•
After completing all the required procedures in this manual, follow the procedures in "FUJITSU Storage
ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)" for each OS.
7
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2015 FUJITSU LIMITED
P3AM-5332-15ENZ0