Fujitsu Eternus DX90 S2 Configuration Manual - Page 7

Browse online or download pdf Configuration Manual for Storage Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 15 pages. Server connection. (fibre channel) for aix
Also for Fujitsu Eternus DX90 S2: User Manual (35 pages), User Manual (42 pages), Manual (18 pages), Instal Setup (20 pages), Configuration Manual Server Connection (13 pages), Hardware Installation (23 pages), Configuration Manual (28 pages), Configuration Manual (38 pages)

Print Page
Fujitsu Eternus DX90 S2 Configuration Manual
Chapter 1
Workflow
Setting the CA Port Groups
Create a group of ports for each CA type.
"2.1.5 Setting the CA Port Groups" (page 11)
•
Setting the FC Host
Register the WWNs of the accessing Fibre Channel cards.
"2.1.6 Registering the WWNs of the Accessing Fibre Channel Cards (Setting FC Host)" (page 11)
•
Setting the Host Affinity
Define the relationship between the FC host, the CA port group, and the LUN group.
•
"2.1.7 Allocating LUN Groups (Setting the Host Affinity)" (page 12)
Setting the Specific Parameters
Set the required parameters according to the OS and the connection configuration.
"2.2 Specific Settings" (page 12)
•
Checking the WWNs
Check information that is necessary for connecting to the server.
"2.3 Checking the WWNs" (page 13)
•
After completing all the required procedures in this manual, follow the procedures in "FUJITSU Storage
ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)" for each OS.
7
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2015 FUJITSU LIMITED
P3AM-5332-15ENZ0