Fujitsu ETERNUS4000 400 Manuel - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Fujitsu ETERNUS4000 400. Fujitsu ETERNUS4000 400 28 pages. Disk storage systems (fibre channel) for oracle solaris
Également pour Fujitsu ETERNUS4000 400 : Manuel (21 pages), Manuel de connexion au serveur (25 pages), Manuel de connexion au serveur (32 pages), Manuel de connexion (19 pages)

Fujitsu ETERNUS4000 400 Manuel
Chapter 8
8.1

Turning on the Devices

To turn on the connected devices, use the following procedures:
1
2
3
8.2

Logical Unit Recognition

Check the state of the ETERNUS Disk storage system LUNs (logical units) using the "format"
command.
Example: ETERNUS2000
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,0
/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,1
/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,0
/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,1
Specify disk (enter its number): Specify disk (enter its number):
P3AM-4182-03ENZ0
Server Connection Guide (iSCSI) for Oracle Solaris
Checking Connections
Procedure
Turn on any devices (such as LAN switches) on the LAN path between the
ETERNUS Disk storage system and server.
After checking that the Ready (or equivalent) LED of the LAN switch is lit, turn on
the ETERNUS Disk storage systems.
After checking that the ETERNUS Disk storage systems' Ready LED is lit, turn
on the server.
1. c6t25d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>
2. c6t26d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>
3. c6t27d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>
4. c6t28d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>
23
End of procedure
Indicates connection
via "CM0"
Indicates connection
via "CM1"
Copyright 2010 FUJITSU LIMITED